Scope DataPage Mark 2 Manuel d'utilisateur télécharger pdf (Page 12)

Scope DataPage UHF MK2 Radio Paging System

DPMK2/6 11 07/05

4: Serial

After pressing ENTER, the display will change to:

STOP BITS (1-2):

Enter a number in the range 1-2 to set.

After pressing ENTER, the display will change to:

Serial Port

Set OK.

The default setting of the serial port is 9600, N, 8, 1

When supplied in the standard configuration, display will read:

Serial Port

Not Active

5: Changing the Password

Whilst at the main programming menu screen, press (

Screen will change to:

ENTER PASSWORD:

Type in current password and press ENTER.

Screen will change to:

NEW PASSWORD:

Type in new password and press ENTER.

Screen will change to:

CONFIRM PASSW’D:

Re-type the new password and press ENTER.

Screen will now read:

Password

Updated OK

The new password is now successfully stored.

To return to the pager entry screen press ENTER or CANCEL when at the main programming menu.

***************************************

1 2 ... 7 8 9 10 11 12 13 14

Pas de commentaire

Scope DataPage Mark 2 Manuel d'utilisateur Page 12